The entertainment market industry is drastically expanding its reach over the past few years. There has been a global rise in entertainment consoles and the gaming industry, a particular category of a technological boom. Gaming consoles have been here for a while. Still, the advancement and progression have led to a sudden increase in the manufacturing process of Atari, Nintendo, Sony, and Microsoft-based entertainment centers. In the early years of the 90s, Nintendo and Sega were the key players in the gaming world; however, Sony redefined the entertainment industry. Sony has inculcated groundbreaking and state-of-the-art gaming strategies and inventive features producing new designs and novel characteristics for the iconic gaming system.
The PlayStation 3 has been a popular home video game console since its release in 2006. However, users have recently complained that the console is freezing up. In some cases, the console will not turn on at all. Sony has not yet released a statement addressing the issue.
Many gamers are wondering what is causing the PS3 to freeze and how they can fix it.
Why Does my PS3 Keep Freezing?
PS3 freezing during gameplay or after start usually because of hardware problems such as overheating, dusty fun, or damaged hard disk. If your system freezes, hold the power button until it shuts down.
How do you fix a PS3 that keeps freezing?
Usually, to fix PS3 freezing, you need to prevent overheating, and the best solution is to clean dusty fun and wait for PS3 to cool. However, sometimes, you need to replace a damaged hard disk in rare situations.
Most users can face two common problems: file system corruption and hard drive failure. If your computer exhibits symptoms of either, try repairing the latter to see if this solves it!
Repair the Hard disk to fix PS3 from freezing
- Shut down the PS3 and start it up by pressing and holding the power button for 10 seconds until you hear three beeps.
- Choose the option Restore File System. This will check the hard drive and repair any corrupted data.
Shut down the PS3 and start it up by pressing and holding its power button for 10 seconds until you hear three beeps. It will shut again, at which point, repeat this process until there are quick double-beeping sounds as well as seeing a Safe Mode screen.
The Restore File System will check the integrity of all files on startup and attempt to repair any errors. However, sometimes there’s nothing left but hope – in those cases, we recommend trying out our powerful restore tool for optimum results!
PlayStation 3 is known to restore if it experiences corrupt data automatically. However, if the PlayStation has not automatically restarted itself, then the correction cycle can be initiated manually by using the safe mode of the PlayStation. It is a diagnostic channel used when there is a default in the hard drive, and the issues need to be sorted out, which cannot be diagnosed through the automatic system menu. The gamers must press and hold the power button to shut down the machine to access the safe mode.
Press and hold the power button for another 10 seconds, after which three beeps will be heard. After the last beep, release the button and repeat pressing and holding the power button, after which the third beep will be heard. This double beep will signal to release the button, and the PlayStation will go into safe mode. The controller should be connected to the PlayStation to navigate the menu through the USB cable quickly.
After entering the safe mode menu in the PlayStation, go to the restore file system, which is used to scan and analyze the diagnosed corrupted data. Entering this option, the PlayStation will be scanned and evaluated, mainly focusing on the problematic drive areas that are not allocated for firmware storage. Give the gadget a few minutes after selecting this option. This will clear and remove the faulty data or corrupted information that is impairing the function of the hard drive. However, some of the useful and valuable data would also be removed.
Selecting the ‘restore PlayStation system’ option will delete some of the critical data and settings present in the hardware as it will take the hard drive to its factory default settings. The restored PlayStation 3 system can also be accessed through the system menu. By accepting this option, the PlayStation 3 will ultimately remove all the corrupted files and information and essential files retained on the hard drive.
Removing impaired data from the PlayStation hardware can be efficiently completed; however, the data writing procedure must be completed correctly to avoid using this option. The hard drive gets damaged if the additional files impeach the data. Users turn off the PlayStation when there are incomplete files and do not properly shut down the PlayStation—properly switching it off before the file transfer is a mandatory regulation. These are some of the most common causes of hard drive corruption and can be avoided if performed correctly. The other way to correct the issue is to remove the HDD from the PlayStation and then reformat it with a computer’s help and reinstall the hard drive in the PlayStation three.
Fix PS3 freezing by cleaning the dust
If you’re experiencing PS3 freezing issues and your console is overheating, cleaning dust may be the solution.
- Before you begin, cut off the power source for your PS3 or unplug the power cable. Make sure there is no light indicator on the PS3.
- Next, hold the disk eject button while you plug in the power cable or switch on your PS3’s power source.
- As you hold down the disk eject button, you should hear your PS3’s fan start-up and a cloud of dust coming from inside the console. This should run for 30-45 seconds before you hear a beep from your PS3, and it shuts off again.
- Please turn off your PS3 from its power source (by unplugging the cable) and then turn it back on again. Check inside to ensure all the dust is removed from your console. Repeat these steps until all the dust has been removed from your PS3.
In rare situations, you need to replace GPU or RAM!
To replace the GPU on your PS3, you must first remove the entire motherboard from the console.
Replace GPU or RAM on PS3
First, remove all cables from the console by unscrewing them from their connectors. Remove any other peripherals, such as hard drives or memory cards.
Once you’ve disconnected everything, unscrew the screws that attach the motherboard to the bottom case of your PS3 and pull out the motherboard carefully. Find and remove the screws that hold down the heat sink and fan assembly over your GPU chip, then gently detach it from your PS3’s motherboard. After that, remove all of the clips holding down your GPU chip.
To replace the RAM chip on your PS3, locate it on your motherboard, remove its heatsink (if applicable), and gently desolder its connections to disconnect it from your motherboard. Replace it with a new RAM chip, solder its connections back in place, reattach its heatsink (if applicable), then put your console back together again.